SMS non-woven fabric, also known as Spunbond+Meltblow+Spunbond Nonwovens, is made by hot-rolling a three-layer fiber mesh consisting of spunbonded non-woven fabric, melt blown non-woven fabric, and spunbonded non-woven fabric.
Normal weight range: 30-500 grams/square meter;
Basic width: 1500mm and 2400mm; Belonging to composite non-woven fabric, it is a composite product of spunbond and melt blown, non-toxic, odorless, and highly effective in isolating bacteria. Through special equipment treatment, it can achieve anti-static, alcohol resistant, plasma resistant, water repellent, and water producing properties.
Product name: PP non-woven fabric, three shoulder non-woven fabric, sms/smms/smmmms non-woven fabric, etc.
Application scope: Suitable for medical supplies, and can also be used for surgical gowns, protective clothing, masks, diapers, women's sanitary napkins, etc.
Product colors: green, blue, white, or customized according to customer requirements.
Product weight range: 40-60g/m2; Conventional weight 45g/m2, 50g/m2, 60g/m2
Usage:
1. Thoroughly clean the items before packaging, and promptly pack them after washing;
2. There should be two layers of materials packaged in two separate packages.
Precautions:
1. It should be stored at a dry room temperature with a relative humidity of no more than 80%, ventilated, cool, hygienic, and free from corrosive gases, avoiding direct sunlight, and avoiding acidic and alkaline environments.
2. This product is in sealed packaging. Please check the integrity of the non-woven fabric before use. If there is any damage, do not use it.
3. Suggest using two different colors.
4. After use, it should be buried in a designated location or incinerated under monitoring.
Product Description:
SMS, SMMS, and SMMMS are all composite non-woven fabrics, which are composite products of spunbond and melt blown. Completely using 100% safe polypropylene fiber as the raw material, it is a disposable medical product final sterilization packaging material formed by one layer of antibacterial layer and two layers of tensile extension layer. Non toxic, no fiber shedding, and high effective bacterial resistance rate; The fabric has good uniformity and fullness, and the product meets the requirements of YY/T 0698.2-2009 and EN 868-2. It has characteristics such as bacteria resistance, anti-static, and tensile strength. SMMS covers all the performance of SMS and greatly expands its capabilities in areas such as bacterial isolation, hydrostatic pressure, strength, uniformity, softness, and application areas. SMMMS can replace pure cotton fabric, with a soft and delicate feel, and excellent skin affinity. The spunbond layer is composed of continuous filaments and has good fracture strength and elongation. Melt blown layer is composed of continuous Microfiber, which has good barrier effect on moisture, bacteria, dust, etc. It has high water pressure resistance and good breathability, as well as good acid and alkali resistance.
Product features:
- Non toxic, environmentally friendly, non sensitive, odorless, non irritating to the skin, no other chemical components, stable performance;
Through special equipment treatment, it can achieve anti-static, alcohol resistant, plasma resistant, water repellent, and water producing properties;
Lightweight, soft to the touch, with good filtering effect and high intensity, it can effectively prevent the invasion and cross infection of dust and harmful particles;
– No hair loss, no powder loss, neutral PH value, no static electricity, no fluorescent agent, 100% pure vegetable fiber and Synthetic fiber, porous;
- Has high water pressure resistance and good breathability; The spunbond layer is composed of continuous filaments, which have good fracture strength, elongation, and wrapping performance;
– Melt blown layer is composed of continuous Microfiber, which has a good barrier effect on moisture, bacteria, microorganisms, dust, etc;
- Capable of allowing steam and sterilization agents to enter the package to the maximum extent possible, and capable of thoroughly resolving residues such as ethylene oxide;
- Antibacterial and chemical resistant agents: with good acid and alkali resistance, polypropylene is a chemically inert substance;
- Good softness, low memory, and convenience;
- Disposable, no damage or consumption after multiple uses, no need for recycling or cleaning; Meets environmental requirements and is easy to degrade or incinerate;
Economically reliable: eliminates the need for hospital cotton cloth disinfection, washing, drying, and other processes, resulting in lower usage costs compared to cotton cloth.
- Prevent cross infection, reduce hidden costs of treatment, and improve infection control rate;
Long shelf life: (double layer bacterial filtration effect) up to 96%, stored under qualified conditions.
SMS non-woven fabric and SMMS non-woven fabric
SMS non-woven fabric, also known as Spunbond+Meltblow+Spunbond Nonwovens, is made by hot-rolling a three-layer fiber mesh consisting of spunbonded non-woven fabric, melt blown non-woven fabric, and spunbonded non-woven fabric.
Normal weight range: 30-500 grams/square meter;
Basic width: 1500mm and 2400mm; Belonging to composite non-woven fabric, it is a composite product of spunbond and melt blown, non-toxic, odorless, and highly effective in isolating bacteria. Through special equipment treatment, it can achieve anti-static, alcohol resistant, plasma resistant, water repellent, and water producing properties.
Product name: PP non-woven fabric, three shoulder non-woven fabric, sms/smms/smmmms non-woven fabric, etc.
Application scope: Suitable for medical supplies, and can also be used for surgical gowns, protective clothing, masks, diapers, women's sanitary napkins, etc.
Product colors: green, blue, white, or customized according to customer requirements.
Product weight range: 40-60g/m2; Conventional weight 45g/m2, 50g/m2, 60g/m2
Usage:
1. Thoroughly clean the items before packaging, and promptly pack them after washing;
2. There should be two layers of materials packaged in two separate packages.
Precautions:
1. It should be stored at a dry room temperature with a relative humidity of no more than 80%, ventilated, cool, hygienic, and free from corrosive gases, avoiding direct sunlight, and avoiding acidic and alkaline environments.
2. This product is in sealed packaging. Please check the integrity of the non-woven fabric before use. If there is any damage, do not use it.
3. Suggest using two different colors.
4. After use, it should be buried in a designated location or incinerated under monitoring.
Product Description:
SMS, SMMS, and SMMMS are all composite non-woven fabrics, which are composite products of spunbond and melt blown. Completely using 100% safe polypropylene fiber as the raw material, it is a disposable medical product final sterilization packaging material formed by one layer of antibacterial layer and two layers of tensile extension layer. Non toxic, no fiber shedding, and high effective bacterial resistance rate; The fabric has good uniformity and fullness, and the product meets the requirements of YY/T 0698.2-2009 and EN 868-2. It has characteristics such as bacteria resistance, anti-static, and tensile strength. SMMS covers all the performance of SMS and greatly expands its capabilities in areas such as bacterial isolation, hydrostatic pressure, strength, uniformity, softness, and application areas. SMMMS can replace pure cotton fabric, with a soft and delicate feel, and excellent skin affinity. The spunbond layer is composed of continuous filaments and has good fracture strength and elongation. Melt blown layer is composed of continuous Microfiber, which has good barrier effect on moisture, bacteria, dust, etc. It has high water pressure resistance and good breathability, as well as good acid and alkali resistance.
Product features:
- Non toxic, environmentally friendly, non sensitive, odorless, non irritating to the skin, no other chemical components, stable performance;
Through special equipment treatment, it can achieve anti-static, alcohol resistant, plasma resistant, water repellent, and water producing properties;
Lightweight, soft to the touch, with good filtering effect and high intensity, it can effectively prevent the invasion and cross infection of dust and harmful particles;
– No hair loss, no powder loss, neutral PH value, no static electricity, no fluorescent agent, 100% pure vegetable fiber and Synthetic fiber, porous;
- Has high water pressure resistance and good breathability; The spunbond layer is composed of continuous filaments, which have good fracture strength, elongation, and wrapping performance;
– Melt blown layer is composed of continuous Microfiber, which has a good barrier effect on moisture, bacteria, microorganisms, dust, etc;
- Capable of allowing steam and sterilization agents to enter the package to the maximum extent possible, and capable of thoroughly resolving residues such as ethylene oxide;
- Antibacterial and chemical resistant agents: with good acid and alkali resistance, polypropylene is a chemically inert substance;
- Good softness, low memory, and convenience;
- Disposable, no damage or consumption after multiple uses, no need for recycling or cleaning; Meets environmental requirements and is easy to degrade or incinerate;
Economically reliable: eliminates the need for hospital cotton cloth disinfection, washing, drying, and other processes, resulting in lower usage costs compared to cotton cloth.
- Prevent cross infection, reduce hidden costs of treatment, and improve infection control rate;
- Long shelf life: (double layer bacterial filtration effect) up to 96%, stored under qualified conditions01
Thin SMS products, due to their waterproof and breathable properties, are particularly suitable for the hygiene market, such as making anti side leakage edges and backing for sanitary napkins, sanitary pads, baby diapers, and adult incontinence diapers.
02
Medium thickness SMS products are suitable for use in medical fields, such as making surgical gowns, surgical bags, surgical masks, sterilization bandages, wound patches, plaster patches, etc. They are also suitable for industrial use in the production of work clothes, protective clothing, etc. SMS products, with their excellent isolation performance, especially SMS products that have undergone triple resistance and anti-static treatment, are more suitable as high-quality medical protective equipment materials and have been widely used worldwide.
03
Thick SMS products are widely used as efficient filtration materials for various gases and liquids, and are also excellent efficient oil absorbing materials. They are used in industrial wastewater degreasing, marine oil pollution cleaning, and industrial rags.

01
Three resistance non-woven fabric SMMS is made of spunbonded non-woven fabric+melt blown non-woven fabric+melt blown non-woven fabric+spunbonded non-woven fabric, with four layers of fiber mesh hot-rolled.
Having all the characteristics of ordinary SMMS non-woven fabric; Up to 10 levels of alcohol resistance (i.e. 100% alcohol resistance); The anti-static ability reaches 108-1012; Oil proof; Anti plasma;
It is mainly used in protective series products such as surgical clothes, surgical scarves, surgical bags, medical bed sheets, hand washing clothes, isolation clothes, White coat, and advanced protective clothing. Different colors can be made according to different customers' preferences

02
Medical non-woven fabric SMMS uses 100% polypropylene slices as the raw material, which is non-toxic, has no fiber shedding, and has a high effective bacterial resistance rate; The fabric has good uniformity and fullness, which can effectively improve product quality.
SMMS can replace pure cotton fabric, with a soft and delicate feel, and excellent skin affinity. The spunbond layer is composed of continuous filaments and has good fracture strength and elongation. Melt blown layer is composed of continuous Microfiber, which has good barrier effect on moisture, bacteria, dust, etc. It has high water pressure resistance and good breathability, as well as good acid and alkali resistance. Suitable for various sterilization methods such as high and low temperatures; Disposable, no need for recycling or cleaning; Meets environmental requirements and is easy to degrade or incinerate; Effectively preventing hospital cross infection, reducing hidden costs of treatment, and improving infection control rate; No repeated use, damage or consumption; No washing cost; Store under qualified conditions, with a sterile validity period of 180 days.

03
The fabric of disposable protective clothing is mainly made of SMMS material, with excellent protective performance and breathable comfort. The main material of microporous protective clothing is coated non-woven fabric, which has the characteristics of preventing microbial penetration and good blood permeability.