08-03
What are the product categories of medical sterilization non-woven fabrics?
The producers of non-woven fabrics are mainly concentrated in the United States (accounting for 41% of the world), Western Europe accounts for 30%, Japan accounts for 8%, and China's output accounts for only 3.5% of the world, but its consumption is 17.5% of the world. It is estimated that by 2007, China's output will reach 7% of the world's output, and its consumption will increase to 21% of the world 's.
07-27
There are many manufacturers of medical sterilization packaging, so which one is the best and most cost-effective??
07-19
Sterilization methods of medical devices
In daily life, each sterilization method has different requirements for medical device packaging materials. For example, for medical devices with long catheters, ethylene oxide sterilization may be difficult to reach the official cavity center, thus affecting the sterilization effect; Some medical devices with sensitive electronic devices may be affected during gamma radiation or electron beam sterilization, so don't let the wrong sterilization method destroy your medical devices.
07-12
Sterilization monitoring best practices
Sterilization refers to the measures that use strong physical and chemical factors to make all microorganisms inside and outside any object lose their growth and reproduction ability forever. Common sterilization methods include chemical reagent sterilization, ray sterilization, dry heat sterilization, moist heat sterilization and filtration sterilization.
07-07
What are the requirements of autoclave?
Autoclave is a kind of reactor operated under high pressure. According to the process requirements, there are two kinds of autoclaves with and without agitators. The structure of the former is the same as that of the mixing equipment. Its structural features are as follows: (1) the kettle body is a high-pressure cylinder with a thick shell. In order to resist high temperature and corrosion, stainless steel is commonly used. Carbon steel or low alloy steel is also used as the shell. Stainless steel is the inner material, which can be directly made of composite plate or lining; (2) Generally, there is no hole on the kettle body, and the connecting pipe, interface and accessories are all set on the kettle cover; (3) The top of the kettle is equipped with safety relief devices, such as safety valves, bursting disc devices or a combination of the two devices.
06-30
Materials and application methods of disinfection and sterilization packaging
Sterilization bag sterilization packaging history sterilization packaging of medical devices is an emerging development field. It can be said that it is an emerging industry all over the world, and it is still in the process of continuous accumulation and summary, especially in China. We began to understand medical device packaging bags around 2005, and gradually integrate with international medical device sterilization packaging. In 2007, it was further valued by China.
06-14
What is the reason for the uneven thickness of blister and how to solve it?
The main advantages of blister packaging are: saving raw and auxiliary materials, light weight, convenient transportation, good sealing performance, and meeting the requirements of environmental protection and green packaging; It can pack any special-shaped products without additional cushioning materials; The packaged products are transparent, beautiful in appearance, easy to sell, suitable for mechanized and automated packaging, convenient for modern management, saving manpower and improving efficiency.
06-10
Verification of medical device packaging that you may not know
Sterile medical device packaging (final sterilization device packaging) is very important for sterile medical devices. It is the basic guarantee for the safety of sterile medical devices. It, together with the sterile device components themselves, constructs the safety and effectiveness of products to ensure that sterile devices can be effectively used in the hands of users.
06-08
Reliable protection of sterile packaging medical teweiqiang materials
Tyvek. DuPont cloth is the trademark of a series of sheet products of DuPont company. It is a spunbonded olefin spun and bonded by numerous fine polyethylene fibers. This unique spray spinning technology can produce light weight, high reflectivity, but very tough materials. Tyvek's advantages include: not easy to deform, soft and smooth, light and tough, excellent opacity, moisture resistance, water stain resistance, and no adhesive. It is a kind of material with a wide range of applications.
05-30
With the requirements for environmental protection in the world, paper plastic packaging bags are slowly on the right track. What are the advantages of paper plastic packaging bags? Paper plastic packaging bag is a new type of packaging bag with high strength, anti-aging, high temperature resistance, moisture-proof, breathable, non-toxic and harmless. It is widely used in packaging food, fresh and frozen food, starch, casein, feed, building materials, chemical industry, mineral products and other industries.